willhilt.blogg.se - Reflection rv self leveling jacks

#REFLECTION RV SELF LEVELING JACKS HOW TO#
#REFLECTION RV SELF LEVELING JACKS INSTALL#
#REFLECTION RV SELF LEVELING JACKS MANUAL#

There’s no correct order but we selected “RIGHT”, which will lower your passenger side middle jack, then your passenger side rear jack.

#REFLECTION RV SELF LEVELING JACKS MANUAL#

Once the front two pads are installed, you can unhitch and enter manual mode in your LCI Level Up ® System.

Have the pad soaped up and aligned properly under your jack and continue to press the button until you hear the “snap”. You can do this by simply turning your system on and pressing the “FRONT” button.

#REFLECTION RV SELF LEVELING JACKS INSTALL#

You’ll want to install the SnapPads to the front two jacks first while still hitched up to your rig.One person was aligning the pads under the jacks and the other was at the control panel lowering the jacks.

While it can be done with one person, we did it with two and it went a little faster that way. We installed our SnapPads in less than five minutes in a rest stop on a travel day.

#REFLECTION RV SELF LEVELING JACKS HOW TO#

If you are wondering how to install SnapPads and have never used manual mode, don’t fear! It’s actually a very easy process. Installing SnapPads with the LCI Level Up ® System

Note: do not retract "FRONT" without being hitched up to your truck.

Push the “FRONT” button to retract the front landing gear legs.

When retracting the rear jack will retract first then the middle.

Push the “RIGHT” button to retract the passenger’s side middle and rear jack.

Push the “LEFT” button to retract the driver’s side middle and rear jack.

Push the “REAR” button to retract all of the middle and rear landing gear legs.

Push the “RETRACT” button, the red LED light will turn on.

Use the Front, Right, Rear and Left buttons to manually control the jacks

When pressing this button the middle jack will extend first then the rear. Push the “RIGHT” button to extend the passenger’s side middle and rear jack.Push the “LEFT” button to extend the driver’s side middle and rear jack.Push the “REAR” button to extend the middle and rear landing gear legs.Push the “FRONT” button to extend the front landing gear legs.Push the “UP” arrow once, or until the screen reads “MANUAL MODE”.If you are using “RETRACT” in manual mode, the rear jack will retract first then the middle jack. Note: if using the “LEFT” or “RIGHT” button in manual mode, the middle jack will extend first then the rear jack. The “REAR” button controls both the left and right middle jacks and rear jacks.The “RIGHT” button controls the middle jack and rear jack on the passenger’s side.The “LEFT” button controls the middle jack and rear jack on the driver’s side.The “FRONT” button controls both left and right front jacks.Let’s dive into the instructions: Control Panel Definitions: This is due to the fact that the “LEFT” and “RIGHT” buttons control two jacks each. Below are the instructions for how to manually control this system but before we get started I would like to point out that even though this system has six jacks, you will not be able to control each jack individually. We own a 2018 Grand Design Solitude, which came with the 6 point LCI Level Up ® with Automatic Leveling. A few examples include adding additional blocks in a very unlevel site, clearing an error code, and our favorite reason, installing SnapPads! We know how easy it is to simply push that “auto-level” button and forget about it but there will be situations where you will need to manually control your jacks. Chances are if you don’t take the time to learn how to control it manually, you’ll find yourself learning on the fly when something goes wrong with your automatic leveling system. We believe it’s very important to learn how to manually control your automatic leveling system early in your RVing adventures.